manualshive.com logo in svg

MIMAKI TS3-1600, Operation Manual

Share
Download
MIMAKI TS3-1600 Operation Manual Download Page 158

4-40

Check message in Local mode

The right message is displayed.

1

Check the waste ink tank, and then replace the waste ink tank 
(

P.4-41) if required.

When waste ink tank check message is not needed

The waste ink tank check message can be set not to be displayed.

1

Select [Waste Ink Warning] of the machine setup menu.

(1)

Press the 

 key in the local mode.

(2)

Select [MACHINE SETUP] by pressing the 

 keys then press the 

 key.

(3)

Select [Waste Ink Warning] by pressing the 

 keys.

(4)

Press the 

 key.

2

Select "OFF " by pressing the 

 

keys.

3

Press the 

 key.

4

Press the 

 key several times to end.

• The check message is not displayed when the waste ink tank warning is set to "OFF". Be sure 

to check the ink remaining amount within the waste ink tank visually.

< LOCA L . 1 >

[ # 0 1 ]

C h e c k w a s t e

i n k <MNT >

Wa s t e I n k Wa r n i n g

SE TUP

:

O

F F

MACH I NE SE TUP
Wa s t e I n k Wa r n i n g < e n t >

Summary of Contents for TS3-1600















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands