MIMAKI TS3-1600, Operation Manual

Page: 47 / 206

2-15
Setting medias
2
Basic Op
eratio
ns
7
Press the key.
8
Press the key to select “LEAF” .
9
The media detection is started.
( 1 ) The media width is detected.
( 2 ) The media is fed then the rear end of media is detected.
( 3 ) It returns to the local mode when the detection is completed.
Notes when using media press
• Do not set media at the position which the media press touches the side plate on the right.
As media may tilt and be lifted, it could break the head.
• If a media is misaligned to the right more than fixed position, a
warning is displayed. Set the media again.
MED I A SE L ECT
ROL L < > L EA F
DE T ECT I NG MED I A NOW
P L EASE WA I T
* * * * * ERROR 5 0 * * * * *
MED I A SE T POS I T I ON R
Media
Media Press
Side plate
on the right
Media press position:27 to 38 mm from the side plate on the right.
(For the variation of the inside diameter of media roll, it ranges as above.)
• Do not locate the suction hole on the platen between
the media and the media press. (It may stain the
media.)
Suction
hole