MIMAKI TS3-1600 Operation Manual Download Page 136

Page: 136 / 206

4-18

When Nozzle clogged after cleaning

When the nozzle clogging is not improved even after the head cleaning(

P.2-24) or the head nozzle

washing (

P.4-10), execute two functions as follows.

Filling up ink

Select [HD.MAINTENANCE] of the maintenance menu.

(1)

Press the

key in the local mode.

(2)

Select [MAINTENANCE] by pressing the

keys then press the

key.

(3)

Select [HD.MAINTENANCE] by pressing the

keys.

(4)

Press the

key.

Press the

key.

• Ink filling is automatically started.

• It returns to the display on the right when the ink filling is

completed.

Press the

key several times to end.

FILL UP INK

• Supplies ink to correct nozzle clogging.

DISCHARGE&WASH

• Washes the heads, dampers and ink tubes cleaning solution

cartridge (option). (

P.4-19)

F I L L I NG UP

0 0 : 0 0

HD . MA I NT ENANCE

F I L L UP I NK

< e n t >

Summary of Contents for TS3-1600















































































































































































































Search results

Summary of Contents for TS3-1600

Reviews:

Brands by name

Popular brands

MIMAKI TS3-1600, Operation Manual

Search results

Summary of Contents for TS3-1600

Reviews:

Brands by name

Popular brands