MIMAKI TS3-1600, Operation Manual

Page: 125 / 206

4-7
Maintaining Capping station
4
Routi
n
e Ma
int
ena
nc
e
Replacing the wiper
The wiper is consumable.When the display indicates that it is necessary
to replace the wiper, immediately replace the wiper with a new one.
Also, wipe ink sticking to the lower surface of the slider off.
1
Press the key in the local mode.
2
Select [WIPER EXCHANGE] by pressing the
keys.
3
Press the key.
• The carriage moves onto the platen.
4
Open the front cover then remove the
wiper.
• Pull out the wiper by holding the projections at
both ends.
5
Insert a new wiper.
• Install the wiper by holding the projections at both
ends.
6
Close the front cover then press the
key.
• After performing the initial operation, the machine
returns to LOCAL mode.
• The wiper to be newly installed is available as an option. Order it from your dealer or a sales
office of MIMAKI.
• Do not select [WIPER EXCHANGE] at any time other than when the wiper is to be
replaced.Once it is selected, the number of wiper operations that is counted in the machine
will be reset.
< LOCA L . 1 > [ # 0 1 ]
R e p l a c e a WI PER <MNT >
S T . MA I NT ENANCE
CARR I AGE OUT
< e n t >
S T . MA I NT ENANCE
WI PER EXCHANGE < e n t >
S T . MA I NT ENANCE
COMP L E T ED
: e n t
Projection
Projection
( COVER OPEN )
PRESS < ENT > KEY
* B e i n g I n i t i a l i z e d *
P L EASE WA I T