manualshive.com logo in svg

MIMAKI TS3-1600, Operation Manual

Share
Download
MIMAKI TS3-1600 Operation Manual Download Page 169

Troubleshooting

5-5

5

T

rouble

shoot

ing

Ink cartridge warning appears

If an ink cartridge trouble is detected, a warning message appears and none of printing, cleaning and all the 
other operations that use ink is available.
In this case, replace the ink cartridge in question immediately.

Displaying the description of ink cartridge trouble

The contents of cartridge error are confirmable by the following operations. (

P.5-7)

1

Press the 

 key in the local mode.

2

Press the 

 key.

• When two or more cartridge troubles occur, warnings can be displayed in turn by pressing

the 

 or 

 key.

• Press the 

 key or 

 key to return to the display of the remaining amount of

ink.

• Once cartridge trouble is displayed, do not leave the ink cartridge without replacing it for a long 

time; otherwise, the machine will lose the nozzle clogging prevention function.
If nozzles are clogged, the machine must be repaired by MIMAKI's service engineer.

ES 3

MMCCYYKK

REMA I N

3 4 5 6 7 8 9 9

NON - OR I G I NA L

I NK

- - - C - - - -

Summary of Contents for TS3-1600















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands