manualshive.com logo in svg

MIMAKI TS3-1600, Operation Manual

Share
Download
MIMAKI TS3-1600 Operation Manual Download Page 19

Moving this machine

1-3

1

Be
fore Use

Moving this machine

Move this machine according to the following steps when this machine is required to move on the step-free 
same floor.

1

Release the lock of caster.

2

Move this machine as shown in the 
figure.

• For safety, be sure to work it with more than 2

persons.

• Do not push the cover to move this machine since

the cover may be broken.

3

Lock the caster.

• When this machine is to be moved to any place other than on the same step-free floor, contact 

your distributor or a sales office of MIMAKI. 
If you move it by yourself, failure or damage may occur. 
Be sure to request your distributor or a sales office of MIMAKI to move this machine.

• When moving this machine, take care not to give a significant impact on it.
• Be sure to lock the caster after moving of this machine.

Summary of Contents for TS3-1600















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands