MIMAKI TS3-1600, Operation Manual

Page: 61 / 206

Head Cleaning
2-29
2
Basic Op
eratio
ns
4
Slowly shake the removed ink cartridge more than twenty times
right and left.
• To prevent ink from leaking when you shake the cartridge, wear gloves and firmly cover
the A part of the upper surface of the cartridge and the B part of the bottom surface of the
cartridge with paper towels. Then, shake it more than twenty times right and left so that ink
flows inside the cartridge.
5
Press the key.
6
Set the cartridge.
• After the cartridge is set, filling starts.
• When filling is completed, the screen returns to LOCAL.
• If you shake it too strong, the pack inside may be damaged and it may cause ink
leakage. Therefore, perform this carefully.
• If the remaining amount of ink is less, ink in the cartridge cannot be beaten
enough. Tilt the cartridge until it becomes vertical.
A part
(the place to stick a
needle) B part
(the slot on the
bottom)
Cover with paper towel firmly and shake ink slowly
Repeat
this
A part
F I L L I NG UP
0 3 : 0 0
< LOCA L . 1 > [ # 0 1 ]