MIMAKI TS3-1600, Operation Manual

Page: 126 / 206

4-8
Prior to Pump tube washing
Prior to washing of the pump tube, it is required that the cleaning solution has been filled within the tube.
Filling Cleaning solution
1
Select [HD.MAINTENANCE] of the maintenance menu.
(1) Press the key in the local mode.
(2) Select [MAINTENANCE] by pressing the keys then press the key.
(3) Select [HD.MAINTENANCE] by pressing the keys.
(4) Press the key.
2
Select [MaintWashLiquid] by pressing the
keys.
3
Press the key.
4
Press the key.
• Proceed to the step 6 when a normal cartridge has been
set.
5
Set a cleaning solution cartridge.
6
Press the key.
• Filling of the cleaning solution is started.
• When the following messages are indicated, check the waste ink tank, and then operate it,
referring to P.4-39 "If Waste ink tank confirming message is displayed" according to the
situation.
C o n f i r m a w a s t e t a n k
C o n t i n u e <
> E x c h a n g e
C o n f i r m a w a s t e t a n k
E x c h a n g e
: e n t
HD . MA I NT ENANCE
Ma i n t Wa s h L i q u i d < e n t >
Ma i n t Wa s h L i q u i d
F I L L I NG UP < e n t >
Ma i n t Wa s h L i q u i d
CARTR I DGE : n o n e
When "END" is indicated :
The cleaning solution is not left.
Replace it with a new cleaning
solution cartridge.
When an abnormal condition is
indicated :
The cartridge that has been set is
not a cleaning solution cartridge.
Ma i n t Wa s h L i q u i d
F I L L I NG UP S T ART : e n t