MIMAKI TS3-1600, Operation Manual

Page: 53 / 206

2-21
Test printing
2
Basic Op
eratio
ns
Perform test printing with the normal test pattern
1
In the local mode,
press the
key.
• Press and key to change the test pattern deployment direction. The
deployment direction changed here returns to the direction set in P.3-36 after test printing.
• When performing test printing after changing the deployment direction from “SCAN DIR.”
to “FEED DIR.”, the line will be fed to the position of the first test printing.
• For the detail of the deployment direction of the test printing, see P.3-36.
2
Press the key.
• This machine starts printing the test pattern.
• After performing test printing, this machine returns to
LOCAL mode.
3
Check the printed test pattern.
• Finish the operations when it is in normal.
• Execute the head cleaning when it is in abnormal. (
P.2-24)
Check before the
test printing
• If a media has been set. P.2-6 • If the origin position has been set.
• If the head gap has been adjusted. P.2-6
T ES T DRAW
< ENT >
* * T ES T DRAW * *
< L OCA L . 1 > [ # 0 1 ]
w i d t h : * * * * mm
Abnormal pattern
Clogged with ink
Normal pattern
Nozzles are dirty