manualshive.com logo in svg

MIMAKI TS3-1600, Operation Manual

Share
Download
MIMAKI TS3-1600 Operation Manual Download Page 36

2-4

Turning the power ON/OFF

Turning the power ON

The machine is provided with the following two power switches.

Main power switch

: At the side of this machine. Keep it "ON" always.

Power switch

: Normally, use this switch to turn the power ON/OFF. The power switch lights in 

green when the power is ON and blinks in green when it is OFF.
The power switch under the operation panel lights in green when the power is 
turned on, and blinks when the power switch is turned off.
The nozzle clogging prevention function is periodically operated even when the 
power switch is OFF if the main power switch keeps being ON. (The power switch 
blinks in green.)

1

Turn the main power switch ON.

• Set the main power switch located on the side of

this machine to the "I" side.

• The firmware version is displayed when the power

is turned on.

• This machine performs initial operation.

2

This machine enters the LOCAL mode.

3

Turn the power of the connected PC ON.

• Turn the power ON after the front cover and maintenance cover are closed.
• The head nozzle may result in nozzle clogging if the main power switch is kept being "OFF" for 

a long time.

Main power 
switch

T S 3 - 1 6 0 0

V * . * *

P l e a s e Wa i t

< L OCA L . 1 >

[ # 0 1 ]

Summary of Contents for TS3-1600















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands