MIMAKI TS3-1600, Operation Manual

Page: 11 / 206

x
Features
Easy maintenance
The automatic capping system for the heads eliminates the need of head cleaning before turning off
the power. Ink discharge passage is automatically cleaned from the cap.
Nozzles can be unclogged by performing the cleaning function.
If the machine is not in use for a prolonged period of time, it automatically performs nozzle clogging
preventive operation at fixed intervals. However, the main power must be left turned on.
The machine counts the time when not in use. When the power is turned on or when printing is started,
the machine automatically performs head cleaning to prevent nozzle clogging.
Convenient direct keys
Use of the direct keys permits quick access to the respective various built-in functions.
Set of the drawing origin by LED pointer
For easy setting of the drawing origin changed, positioning can be done by a light point of the LED
pointer equipped on the carriage.
Printing information can be checked
The print length can be displayed on the LCD panel during printing and the information of printing
conditions can be checked by printing it.
High-speed interface
The "USB 2.0" interface allows for high-speed data reception from the computer.
Take-up Device permits printing over a long length
Even a long sheet of media can be used, since the take-up device interlocked with the machine winds
up the printed part of the sheet during printing.
A media support bar newly provided
The machine is provided with a media support bar at the back. It is useful when a heavy roll of media,
such as Tarpaulin, is set on the machine.
Adjustable to the height of Head (2 levels)
The height of Head is adjustable in 2mm/3mm by the adjusting lever.
Lifting of the media at its both ends is prevented
The use of the media press prevents the wide sheet of media from lifting at its both ends and coming in
contact with the head unit.