manualshive.com logo in svg

MIMAKI TS3-1600, Operation Manual

Share
Download
MIMAKI TS3-1600 Operation Manual Download Page 28

1-12

Inserting ink cartridges

Insert an ink cartridges.

1

Shake the ink cartridge as shown on 
the right.

2

Insert the ink cartridge.

• Insert the ink cartridge lengthwise directing the

surface having IC chips to the left side.

• Colors are displayed on the display as follows.

Black: K, Cyan: C, Magenta: M, Yellow: Y, 
Light cyan: c, Light magenta: m, White: W, 
Silver: S

Changing an ink cartridge

Perform as follows when [INK END] or [INK NEAR END] is displayed on the display.

●

When  [INK END] is displayed

(1)

Pull out an ink cartridge to be replaced.

(2)

Insert a new ink cartridge, paying attention to the direction of IC chip.

●

When [INK NEAR END] is displayed

There is a little of ink left. It is recommended to replace the ink cartridge soon since ink may become 
empty in printing while printing is continuously enabled.

• During [INK NEAR END] is displayed, the setting of In-printing cleaning is disabled. (

P.3-

24)

• If solvent ink is selected when the machine is installed, it is not possible to change from the 

solvent ink to dye ink.

Summary of Contents for TS3-1600















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands