MIMAKI TS3-1600, Operation Manual

Page: 57 / 206

2-25
Head Cleaning
2
Basic Op
eratio
ns
Perform head cleaning depending on the test printing result
There are three types of head cleaning. Use one by checking the test pattern.
1
In the local mode,
press the
key.
2
Select the cleaning type by pressing the
keys.
NORMAL
：
Select this if any line is missing.
SOFT
：
When only head wiping is desirable. (in case of bent lines)
HARD ： Select this if inferior printing cannot be improved even by [NORMAL] or [SOFT]
cleaning.
3
Press the key.
• The rest of the cleaning time is indicated at the lower of
the display.
• On completion of cleaning, this machine returns to
LOCAL mode.
4
Perform test printing again, and check the result.
• Repeat the cleaning and the test printing until the drawing result becomes in normal.
When the image quality is not improved after the head cleaning.
• Clean the wiper and ink cap. ( P.4-5)
• Wash the head nozzle. ( P.4-10)
• Solve the failure of the image quality, referring to "When Nozzle clogged after cleaning".
( P.4-18)
C L EAN I NG
T YPE : NORMA L
C L EAN I NG
T YPE : HARD
C L EAN I NG ACT I VE
0 0 : 0 0