manualshive.com logo in svg

MIMAKI TS3-1600, Operation Manual

Share
Download
MIMAKI TS3-1600 Operation Manual Download Page 162

4-44

Replacing the cutter blade

The cutter blade is consumable. When the cutter blade gets dull, replace it with a new one (SPA-0107).

1

Press the 

 key then press the 

 key.

• The carriage moves onto the platen.

2

Open the front cover.

3

Replace the cutter unit by the carriage.

(1)

Loosen a screw of the cutter unit.

(2)

Remove the cutter unit.

(3)

Mount a new cutter unit.

(4)

Fasten the screw of the cutter unit to secure the cutter unit.

• The blade is sharp. Be careful not to hurt yourself or anyone else.
• Keep the cutter blades away from the reach of children. Be sure to dispose of the worn-out 

cutter blades according to the applicable national and local laws and regulations.

• When replacing the cutter blade, it is recommended to place a sheet of paper under the cutter 

blade. This will help pick up the cutter blade if it drops.

Front cover

Screw

Cutter 
unit

Summary of Contents for TS3-1600















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands