Milestone s.r.l.
MM098-002
– LOGOS ONE – Operator Manual
48
Choose the Run Mode: AUTOMATIC or DUAL RUN.
A.
AUTOMATIC: at the end of the last phase in the MAIN CAVITY, WAX is AUTOMATICALLY pumped
from the WAX CAVITY into the MAIN CAVITY.
B.
DUAL RUN: at the end of the last phase in the MAIN CAVITY, an audio alarm warns USER to
MANUALLY move the rack from the MAIN to the WAX CAVITY, where WAX phase will be executed.
Choose the STARTING way: GO or GO DELAY (for details see chapter 3.2.6).
A.
GO: the run is started immediately.
B.
GO DELAY: start of the run is delayed so that program automatically starts and is completed by the
time set by the USER.
The following screen appears. All the details of the process are shown, like the Run duration and the
Completi
on time. Press “Start Run” to run the cycle NOW.
The following message appears, read carefully the message on the screen and press OK to start the
process.
The heating fixation phase is included as default; if not required, select “Exclude” to skip
it. It’s suggested to include the heating fixation phase in the process to standardize the
results.