Milestone s.r.l.
MM098-002
– LOGOS ONE – Operator Manual
37
It is possible to insert in that field the REAGENT
LOT CODE. This function is not compulsory.
If a bar code reader is connected to LOGOS ONE,
the code can be automatically read. If not, press
the field window, a keyboard appears to allow entry
of the LOT number.
When the code is inserted, the following screen
appears: the lot number is shown into the field.
Press “Done” to complete the replacement
procedure.
The Lot Code is saved in the
Reagents Log
under “
Log Book
” icon.
The Lot Code is reported under the new column LOT CODE.
Lot code is not compulsory. So if not needed, follow the regular procedure to replace a
reagent, by pressing “Done” without inserting any code before.
Refer to the chapter 6.3 to get instructions on how to export the Reagent log list.