Miele PG 8058 Operating Instructions Manual Download Page 55

Page: 55 / 124

Operation

Interrupting a programme

A programme which is already running should only be interrupted if
strictly necessary, e.g. if the wash load is moving about significantly.



Caution. The wash load and the interior of the dishwasher may

be hot.
Danger of scalding and burning.



Press the



button.



If the temperature in the wash cabinet is more than 70 °C, the

warning

Wash cabinet too hot

will appear in the display.



Confirm the message shown with the

button.

The following will appear in the display:

Open door?

Yes

(



Select

Yes

and confirm your choice with the

button.

The programme will only be cancelled when

Yes

is confirmed.

If there is no further input 20 seconds after the



button has been

pressed, the display will revert to the programme sequence.

The door will open and the following message will appear in the
display:

Programme interrupted:
Door opened



Rearrange the items so that they are stable.



Close the door.

The programme will continue from the point at which it was
interrupted.

The display will automatically revert to the programme sequence.

Summary of Contents for PG 8058





























































































































Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands

Miele PG 8058, Operating Instructions Manual

Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands