Miele PG 8058 Operating Instructions Manual Download Page 25

Page: 25 / 124

Opening and closing the door

Closing the door



Push the baskets right in.



Raise the door upwards and push it gently until the catch audibly
engages. The door will be drawn automatically into its final closed
position by the closing mechanism.



Do not put your hand inside the door as it is closing.

Danger of injury.

If the door cannot be closed properly by the mechanism because it
is obstructed by crockery or similar, the

Door blocked

message or

433

will appear in the display (see "Problem solving guide") and the

mechanism will open.



Remove the obstruction from the vicinity of the door.

If too much force is used when closing the door, the Comfort door
locking mechanism will reopen the door.

The dishwasher can only be guaranteed as waterproof if the
automatic closing mechanism has drawn the door into the final
closed position.

Summary of Contents for PG 8058





























































































































Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands

Miele PG 8058, Operating Instructions Manual

Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands