Miele PG 8058 Operating Instructions Manual Download Page 96

Page: 96 / 124

Cleaning and care

Cleaning the door and the door seal



Wipe the door seal and the area beneath the door regularly with a
damp cloth to remove food deposits.



Wipe away any spillages of food and drink from the sides of the
dishwasher and from the hinges.



With freestanding dishwashers that have a plinth facing, please
remove spillages of food and drink from the channel that runs
below the door



Be careful of sharp edges when cleaning.

Danger of cutting yourself.

These surfaces are outside the wash cabinet and are not accessed
by water from the spray arms. If soiling is not removed mould can
develop.

Cleaning the filters in the wash cabinet

The filter combination in the base of the wash cabinet retains coarse
soil from the wash liquor, preventing it accessing the circulation
system and causing blockages in the spray arms.



This dishwasher must not be used without all the filters in place.

The filters must be checked regularly and cleaned when necessary.



Warning!

Danger of injury on glass splinters.

Cleaning the
coarse filter



Press the catches towards each other and remove the coarse filter.



Rinse the filter thoroughly under running water. If necessary use a
soft washing-up brush to remove soiling.



Replace the filter making sure it engages correctly.

Summary of Contents for PG 8058





























































































































Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands

Miele PG 8058, Operating Instructions Manual

Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands