Miele PG 8058 Operating Instructions Manual Download Page 104

Page: 104 / 124

Problem solving guide

104

Noises

Problem

Cause and remedy

Knocking noise in the
wash cabinet.

A spray arm is knocking against an item in a basket.



Interrupt the programme, and rearrange the items which
are obstructing the spray arm.

Rattling noise in the wash
cabinet.

Items are insecure in the wash cabinet.



Interrupt the programme, and rearrange the load.

A foreign object (e.g. a cherry stone) has become lodged in
the drain pump.



Remove the foreign object from the drain pump (see
"Maintenance, Cleaning the drain pump and non-return
valve").

Knocking noise in the
water pipes.

This may be caused by the on-site installation or the cross-
section of the piping.

This has no effect on the functioning of the dishwasher.



If in doubt, contact a suitably qualified plumber.

Summary of Contents for PG 8058





























































































































Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands

Miele PG 8058, Operating Instructions Manual

Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands