Miele PG 8058 Operating Instructions Manual Download Page 62

Page: 62 / 124

Settings



Delay start

You can select whether Delay start appears in the Additional
functions menu or not.
Selecting

will remove Delay start from the Additional functions

menu for operators.
To be able to delay the start of a programme,

Yes

must be selected in

order for it to be displayed in Additional functions.
To set the start time see "Additional functions, Delay start".



Select the Settings



menu.



Select

Delay start

and confirm your choice with the

button.

The following options are available:

Delay start

Yes

(

–

Delay start is switched off and therefore not visible as an additional
function.

–

Yes

Delay start is switched on.



Select the option you want and confirm your choice with the

button.

Summary of Contents for PG 8058





























































































































Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands

Miele PG 8058, Operating Instructions Manual

Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands