Miele PG 8058 Operating Instructions Manual Download Page 92

Page: 92 / 124

Further settings

Factory default setting

The factory default setting can be used to reset all changed
parameters in the dishwasher, or just values that have been changed
for programmes, back to their default settings.



Select the

Further settings

menu.

Factory default

Reset



Select

Factory default

and press

to open the relevant menu.

The following options are available:

Reset

Programme settings only

;

(

–

Altered parameters will not be reset to their default settings.

–

Programme settings only

Only values that have been altered in programmes will be reset to
their default settings.

–

All settings

All parameters that have been altered in the dishwasher will be
reset to their default settings.



Select the option you want and confirm your choice with the

button.

Summary of Contents for PG 8058





























































































































Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands

Miele PG 8058, Operating Instructions Manual

Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands