Miele PG 8058 Operating Instructions Manual Download Page 58

Page: 58 / 124

Additional functions

Drying assistance

To achieve better drying results, the dishwasher door will
automatically open a few centimetres at the end of the programme.
This function cannot be activated for all programmes (see
"Programme chart").

Drying assistance can be activated or deactivated for the selected
programme, even if it is switched on or off permanently under
"

Settings 

Drying

The setting adopted will then be applied once for the programme
selected and will go out at the end of the programme.



Switch the dishwasher on with the



button.



Select the programme you require (see "Operation, Selecting a
programme"). The

Start/Stop

button's LED will flash.



Press the

button.

If Delay start has been activated under "

Settings 

Delay start

", the

following will appear in the Selection menu:

Selection

Drying assistance

Delay start



Select

Drying assistance

and confirm your choice with the

button.

If delay start has been deactivated under "

Settings 

Delay start

", the

options for drying assistance will appear immediately.

Drying

Yes

(

–

Drying assistance is deactivated for the selected programme.

–

Yes

Drying assistance is activated for the selected programme.

The opposite of the setting which has been adopted under "

Settings



Drying

" will appear as an option in the display.

Pressing the

button will adopt the option.

Summary of Contents for PG 8058





























































































































Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands

Miele PG 8058, Operating Instructions Manual

Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands