Miele PG 8058 Operating Instructions Manual Download Page 30

Page: 30 / 124

Filling the salt reservoir

Add salt reminder



Fill the salt reservoir with dishwasher salt for reactivation as soon as
the reminder appears in the display.



Confirm the message shown with the

button.

If salt is not added, the



symbol indicating a lack of salt will appear

beside the programme name on the right.
The refill reminder will appear again at the end of every programme.

Refill reminders can be displayed during the programme cycle by
pressing the

button.

If there are no further refill reminders, the



symbol in the display will

go out after a few seconds when the salt is refilled.

The salt refill reminder is deactivated if the dishwasher is set to a
water hardness of 0 - 0.7 mmol/l (0 - 4 °dH).

Machine lock-out in case of lack of salt

If the refill salt reminder is ignored for several programme cycles and
the salt is not refilled, the dishwasher will lock itself against further
use until it is refilled.

The following message will appear in the display shortly before this
happens:

Machine locking out
Insufficient salt

Only a few more programme cycles are possible, depending on the
programme selected and water hardness level set.

The dishwasher is locked against operation if further programme
cycles are run without salt being refilled.

Salt container empty,
Programme locked out

When reactivation salt is added the machine will unlock itself after
a few seconds.

Summary of Contents for PG 8058





























































































































Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands

Miele PG 8058, Operating Instructions Manual

Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands