Miele PG 8058 Operating Instructions Manual Download Page 50

Page: 50 / 124

Operation

LEDs in the buttons

Light-emitting diodes that indicate the status of the dishwasher are
set into the buttons.
Except for the

Start/Stop

button, which has a green LED in normal

operation, all other LEDs light up yellow.
In the event of a fault the

Start/Stop

button flashes red.

Button

LED

Status



On/Off

button

The dishwasher is switched on.

OFF

The dishwasher is switched off.

Buttons





and



Programme
short cut
buttons

The respective programme has been
selected. At the end of the programme
the LED will remain lit until a different
programme is selected.

OFF

The programme is not selected or the
programme settings are being selected.

Further
programme
s



button

A programme was selected from the
programme list. At the end of the
programme the LED will remain lit until a
different programme is selected.

OFF

No programme has been selected from
the list or the programme settings are
being selected.

Start/Stop

button

Programme running

FLASHES
GREEN

A programme has been selected but not
yet started.

FLASHES
RED

A fault has occurred.

OFF

A programme has finished.



Door

button

A programme has been selected but not
yet started.

FLASHES

A programme is finished and the door is
closed.

OFF

Programme running

Summary of Contents for PG 8058





























































































































Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands

Miele PG 8058, Operating Instructions Manual

Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands