Miele PG 8058 Operating Instructions Manual Download Page 88

Page: 88 / 124

Further settings

Releasing programmes

Individual programmes can be blocked so that they cannot be used.
All programmes are released for use as default.



Select the

Further settings

menu.

Release programme

All

Selection

(



Select

Release programme

and press

to open the relevant

menu.

The following options are available:

–

All

All programmes are released for use.

–

Selection

Individual programmes can be blocked.

Blocking
programmes



Select

Selection

and confirm your choice with the

button.

Release programme

Glasses special

Cutlery

;



Select the programmes that you want to block from use and press
the

button.

The tick



will be removed from the box



and the programme

cannot then be used.



To save your selection, select

at the end of the programme

list and confirm your choice with the

button.

If programmes have been blocked,

Selection



is selected when

Release programme is opened again.

Summary of Contents for PG 8058





























































































































Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands

Miele PG 8058, Operating Instructions Manual

Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands