Miele PG 8058 Operating Instructions Manual Download Page 65

Page: 65 / 124

Settings



Venting DOS modules

This option is only visible when a DOS module is connected.

The dispensing system for liquid agents can only dispense reliably if
the system has been purged of air.

The DOS system must be vented:

– if the dispensing system is being used for the first time,

– if the liquid cleaning agent or rinsing agent reservoir was not refilled

in time and the DOS system was emptied.



To avoid damage to the dispensing system, make sure before

venting that the containers for cleaning agent and rinsing agent are
sufficiently filled and the dispensing siphons are screwed securely
to the containers.



Select the

Settings 

menu.



Select

DOS venting

and confirm your choice with the

button.

DOS venting

DOS1

DOS4



Select the dispensing system to be vented using the



and



arrows and confirm your choice with the

button.

The dishwasher will then start to vent the selected dispensing system
automatically. As soon as this is completed,

Dispensing system DOS

successfully vented

will appear in the display.



Confirm the message with the

button.

Summary of Contents for PG 8058





























































































































Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands

Miele PG 8058, Operating Instructions Manual

Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands