Miele PG 8058 Operating Instructions Manual Download Page 82

Page: 82 / 124

Further settings

DOS dispensing
system



Select the

Dispensing system

option and confirm your choice with

the

button.

Dispensing system

DOS1

;
,

DOS 2 Rinsing agent



Select the dispensing system you want and confirm your choice
with the

button.

The following options are available:

Active

Inactive

;

DOS1

–

Active

Dispensing system activated.

–

Inactive

Dispensing system not activated.

–

DOS venting

This vents the dispensing system to ensure reliable dispensing.

–

Concentration

The concentration level of cleaning agent and/or rinsing agent can
be set to suit requirements.

–

Change name

The name of the dispenser can be changed.

With

DOS 2 Rinsing agent

the only option displayed is

Concentration

The options

DOS venting

Concentration

and

Change name

are only

visible if

Active

has been selected

Summary of Contents for PG 8058





























































































































Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands

Miele PG 8058, Operating Instructions Manual

Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands