![background image](http://html.mh-extra.com/html/miele/pg-8058/pg-8058_operating-instructions-manual_234957101.webp)
Problem solving guide
101
Problem
Cause and remedy
Fault 412-414
Water inlet fault.
One of these fault numbers will appear in the display if the
flow pressure is too high and the programme will be
cancelled.
The flow pressure at the water intake point is too high
(see "Technical data"). Contact Miele Service for advice.
Check drainage
Drain fault. There might be water in the wash cabinet.
Clean the filter combination (see "Cleaning and care").
Clean the drain pump (see "Maintenance").
Clean the non-return valve (see "Maintenance").
Remove any kink or loop in the drain hose.
Fault 433
The door was obstructed when closing and cannot be
drawn into the final closed position.
Remove the obstruction from the vicinity of the door.
Fault 438
Heavy objects in front of the washer-disinfector can impede
the automatic opening of the door by the Comfort lock.
Do not place heavy objects in front of the door of the
machine.
Fault 492, 504, 541
The programme has not started properly. There might be
water in the wash cabinet.
Clean the filter combination (see "Cleaning and care").
Clean the non-return valve (see "Maintenance").
Fault 550
The Waterproof system has reacted.
Close the stopcock.
Call the Miele Service Department.
Fault XXX
(XXX stands for a number)
There may be a technical fault.
After 10 seconds:
Switch the dishwasher back on.
Select the programme you want.
Press the
Start/Stop
button.
If the fault message appears again, there is a technical
fault.
Call the Miele Service Department.
Summary of Contents for PG 8058
Page 123: ......