Filling the salt reservoir
28
Setting the water hardness level
The water softener can be set between 0 - 12.6 mmol/l (0 - 70 °dH).
Select the
Further settings
menu.
Select
Water hardness
and confirm your choice with the
OK
button.
Water hardness
19
(0 - 70 °dH)
°dH
The factory default for the water softener is set to a hardness of
3.4° mmol/l (19°dH).
When adjusting the setting, please consult the following table.
Where the water hardness fluctuates, e.g. between 1.4 - 3.1 mmol/l (8
- 17 °dH), always programme the dishwasher to the higher value, 3.1
mmol/l (17 °dH) in this example.
Use the
(higher) and
(lower) arrow buttons to set the water
hardness required and confirm your entry using the
OK
button.
Summary of Contents for PG 8058
Page 123: ......
