Miele PG 8058 Operating Instructions Manual Download Page 83

Page: 83 / 124

Further settings

DOS venting



To avoid damage to the dispensing system, make sure before

venting that the containers for cleaning agent and rinsing agent are
sufficiently filled and the dispensing siphons are screwed securely
to the containers.



Select

DOS venting

and confirm your choice with the

button.

The dishwasher will now start the automatic venting process of the
dispenser system.

Dispensing system DOS venting

will appear in the display.

As soon as the process has finished,

Dispensing system DOS

successfully vented

will appear in the display.



Confirm the message with the

button.

Setting the DOS
concentration level

Please observe dispensing recommendations made by the
manufacturer of the agent.



Select

Concentration

and confirm your choice with the

button.

Concentration levels are given as a percentage and can be set
between 0.01 and 2.00 %.

The concentration level set then applies to all programmes.

Display for DOS1:

Concentration

0,30

(0,01 - 2,00 %)

If a DOS G 60 module is connected to the dishwasher, the factory
set concentration level must be reduced by half.

Display for DOS2 Rinsing agent and DOS4:

Concentration

0,04

(0,01 - 2,00 %)



Use the arrow buttons



(higher)



(lower) to set the concentration

level you want and confirm your choice with the

button.

Summary of Contents for PG 8058





























































































































Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands

Miele PG 8058, Operating Instructions Manual

Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands