Miele PG 8058 Operating Instructions Manual Download Page 23

Page: 23 / 124

Commissioning

Plumbing
connections

The display will then change to the screen for setting the plumbing
connection.

This setting can be switched off if the dishwasher cannot be
connected to all available plumbing connections.

If individual plumbing connections are switched off, they can only
be reactivated by Miele Service.

If an AD water supply is not available and you wish to use the Beer
glasses programme, the controls on the dishwasher have to be
reprogrammed by a Miele service technician to enable the final
rinse to be carried out with cold water.

Plumbing connections

Cold water

;



Use the



and



arrow buttons to select the plumbing connections

which are not connected and confirm your choice using the

button.

The tick



will be removed from the box



and the plumbing

connection is now switched off.



Select

to save your selection and confirm using the

button.

Commissioning
completed

Commissioning is successfully completed and the following message
will appear in the display.



Set up successful



Press the

button.

The dishwasher is now ready for use.

PROFESSIONAL

PG 8058

The start screen is displayed for 3 seconds.
Then the first short cut button programme will appear in the display.

Summary of Contents for PG 8058





























































































































Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands

Miele PG 8058, Operating Instructions Manual

Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands