Miele PG 8058 Operating Instructions Manual Download Page 86

Page: 86 / 124

Further settings

Main wash / Final
rinse

The procedure for altering settings in

Main wash

and

Final rinse

is the

same. The display also looks similar.



Select the

Main wash

Final rinse

option and confirm your choice

with the

button.

Short

Holding time

Final rinse temp.



Select the wash programme you want and confirm your choice with
the

button.

The following options are available:

–

Temperature

Final rinse temp.

The temperature for the main wash or the final rinse can be
changed.

–

Holding time

The temperature holding time can be changed.

Final rinse
temperature



Select

Temperature

Final rinse temp.

and confirm your choice with

the

button.

The temperature for the main wash or the final rinse can be set from
30 to 85 °C in 1 °C increments.
In the Super short programme, the temperature can only be increased
to 70 °C.

°C

(30 - 85 °C)

Final rinse temp.



Use the arrow buttons



(higher)



(lower) to set the temperature

you want and confirm your choice with the

button.

Summary of Contents for PG 8058





























































































































Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands

Miele PG 8058, Operating Instructions Manual

Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands