MICRO-EPSILON colorSENSOR CFO Operating Instructions Manual Download Page 78

Page: 78 / 138

Page 78

Operation

colorSENSOR CFO

5.5.4.1

Location Chart / Third Angle Projection

Select the

Measurement > Location diagram

Now, depending on the color space, the learned colors including the set tolerance range are displayed.

Depending on the accuracy of the display medium, the coloring of the displayed tolerance ranges approximates the color values

acquired by the controller.

RGB cannot represent all real colors. However, since most display media are based on RGB technology, but the measuring system

operates in the XYZ range, the colors displayed do not correspond to reality and can only be approximated (see also Basics of Colo-

rimetry).

Fig. 66 Measurement
chart, location diagram

Summary of Contents for colorSENSOR CFO











































































































































Search results

Summary of Contents for colorSENSOR CFO

Reviews:

Related manuals for colorSENSOR CFO

Brands by name

Popular brands

MICRO-EPSILON colorSENSOR CFO, Operating Instructions Manual

Search results

Summary of Contents for colorSENSOR CFO

Reviews:

Related manuals for colorSENSOR CFO

Brands by name

Popular brands