MICRO-EPSILON colorSENSOR CFO Operating Instructions Manual Download Page 119

Page: 119 / 138

Page 119

Operation

colorSENSOR CFO

All output values and additional information to be transmitted, which were acquired at a certain point in time,
are combined to a measured value frame, described in the Interface Instructions

, see A 3

5.6.8.4

Managing Settings

Go to the menu

Settings

System settings

Manage settings

All settings on the controller, e.g. controller settings, colors, Ethernet settings, can be permanently stored in

user programs, so-called parameter sets.

During programming, all settings are saved in the controller
regularly (every 30 s at the latest) so that they are available
again the next time the controller is switched on.

However, it is recommended to save the data in an exter-

nal parameter set to be able to reconstruct them in case
of a system failure.

To do this, select

Manage settings

Export set-

tings > Export

Fig. 63 Manage settings

Summary of Contents for colorSENSOR CFO











































































































































Search results

Summary of Contents for colorSENSOR CFO

Reviews:

Related manuals for colorSENSOR CFO

Brands by name

Popular brands

MICRO-EPSILON colorSENSOR CFO, Operating Instructions Manual

Search results

Summary of Contents for colorSENSOR CFO

Reviews:

Related manuals for colorSENSOR CFO

Brands by name

Popular brands