MICRO-EPSILON colorSENSOR CFO Operating Instructions Manual Download Page 37

Page: 37 / 138

Page 37

Installation and Assembly

colorSENSOR CFO

4.4

CFS Sensor

Plug the sensor (optical fiber) into the sensor socket (CFS or FA connector) on the controller.

Fig. 18 Sensor connection on the controller

Fig. 19 Mounting of sensor (optical fiber)

The coding on the sensor connector (CFS or FA) is on the side of the illumination LED.

Keep the end surfaces of the sensor free of dust, avoid any damage or soiling, e.g. by touching. This also ap-
plies to the plug connectors at the controller.

> Error-free recognition of colors no longer guaranteed

> Erroneous measurements

> Damage to sensor

For this reason clean soiled end surfaces with pure alcohol and a clean, lint-free microfiber cloth.

NOTICE

Summary of Contents for colorSENSOR CFO











































































































































Search results

Summary of Contents for colorSENSOR CFO

Reviews:

Related manuals for colorSENSOR CFO

Brands by name

Popular brands

MICRO-EPSILON colorSENSOR CFO, Operating Instructions Manual

Search results

Summary of Contents for colorSENSOR CFO

Reviews:

Related manuals for colorSENSOR CFO

Brands by name

Popular brands