MICRO-EPSILON colorSENSOR CFO, Operating Instructions Manual

Page: 98 / 138

Page 98
Operation
colorSENSOR CFO
5.6.5.2 Teaching and Editing Colors
Go to
Settings
>
Color table > Teach color
and/or
Edit.
New colors can be taught and added to the corresponding color group memory. Individual colors, entire
color groups or the entire color table can be changed and deleted
, see 5.3.5, see 5.6.5.3 (Delete color table).
If the color table is still empty, create a new color group , see 5.6.5.1 (Add color group).
The button can be used to add further individual colors to the color group.
The button allows you to make custom settings for each color group. These settings include a custom
name, a tolerance model with custom tolerance values, the output configuration and the hold time for the
switching outputs.
Teaching colors Teaches current color (1) and adds it to the corresponding color
group memory
, see Fig. 47 .
Edit Allows editing and setting the color group (2). The settings of a color
group can be changed, such as
Name
(13),
Distance model
(12),
tolerance size,
Hold time
(8) of the output signal, output configura-
tion.
The name may be a maximum of 64 characters long and contain
only alphanumeric characters (a-z, A-Z, 0-9, no umlauts), spaces
and the special char-#,.()
, see Fig. 47.
Delete Deletes a color group (3) or color (4) , see Fig. 47.
Apply Applies the current entry (5) , see Fig. 47.
Cancel Discards the current entry without saving (6) , see Fig. 47.
i
Before creating a new color table, set the parameters for the color space and controller modulation, see
Settings > Detection profile
menu , see 5.5.3 .
If you subsequently change the controller modulation, all colors must be learned again.