Page 116
Operation
colorSENSOR CFO
Assign a static IP address or activate DHCP.
When DHCP is activated, the controller is accessible in the network under its DHCP Host name. The DHCP
host name must be at least one and at most 63 characters long and may only contain alphanumeric charac-
ters (a-z, A-Z, 0-9, no umlauts) and the special character -.
With DHCP it may be necessary to enable the controller MAC address in the network.
Go to the
Apply
button to apply the settings you have made.
Ethernet set-
tings IPv4
Method
Static
IP address
Value
When using a static IP ad-
dress it is necessary to enter
the values for the IP address,
Gateway and Subnet mask;
this is not required when
DHCP is used.
Subnet mask
Value
Gateway
Value
Dynamic
(DHCP)
DHCP
Host name
Value
When DHCP is activated, the
controller is accessible in the
network under its DHCP Host
name.
With DHCP it may be neces-
sary to enable the controller
MAC address in the network.
MAC address
Value
Go to the menu
Settings
>
System settings
>
Ethernet settings IPv4
.
Fields with gray
background re-
quire a selection.
Val-
ue
Fields with dark
border require
entry of a value.
Summary of Contents for colorSENSOR CFO
Page 7: ...Page 7 colorSENSOR CFO...
Page 8: ...Page 8 colorSENSOR CFO...
Page 96: ...Page 96 Operation colorSENSOR CFO Fig 45 Settings Color table menu...
Page 137: ......
