Page 46
Operation
colorSENSOR CFO
INT
OPT
ESC
TOL
CLR
TEACH
AUTO
1
2
3
4
5
6
7
8
OPTIONS
OUT / LE
VEL
GATE
TEACH
HOLD
MULTI
CLASSIFY
CYLINDER
SPHERE
BOX
The number of illuminated output LEDs indicates the relative intensity currently
being received by the controller.
i
All output LEDs 1 - 8 flash on and off simultaneously to indicate overmodu-
lation of the photo receiver.
5.3.3.1
Automatic Modulation
The automatic modulation determines a suitable combination of internal controller parameters for the current
optical situation. Here, the modulation of the receiver is adjusted so that it detects enough light, but not too
much. (standard setting 80 %)
The controller internally sets the best combination of measurement averaging, LED intensity and amplifying
factors depending on the selected measurement frequency.
INT
OPT
ESC
TOL
CLR
TEACH
AUTO
1
2
3
4
5
6
7
8
OPTIONS
OUT / LE
VEL
GATE
TEACH
HOLD
MULTI
CLASSIFY
CYLINDER
SPHERE
BOX
Press the
AUTO
key for less than 2 sec.
This starts an automatic modulation
i
The modulation of the controller parameters should be set for the brightest
color to be tested.
The controller should have reached operating temperature. Depending on the
ambient conditions, this is the case after approx. 45 min. warm-up time.
Summary of Contents for colorSENSOR CFO
Page 7: ...Page 7 colorSENSOR CFO...
Page 8: ...Page 8 colorSENSOR CFO...
Page 96: ...Page 96 Operation colorSENSOR CFO Fig 45 Settings Color table menu...
Page 137: ......
