MICRO-EPSILON colorSENSOR CFO, Operating Instructions Manual

Page: 45 / 138

Page 45
Operation
colorSENSOR CFO
Before After Action
Menu mode Save all changes
/ return to oper-
ating mode
Press (hold) the ENTER key for more than 2 sec. (INT ) to
save all changes made and return to the operating mode.
Menu mode Discard all
changes / return
to operating
mode
Press (hold) the ESC key
(TOL)
for more than 2 sec. to
throw out all changes and return to the operating mode
without saving.
5.3.3 Intensity
System adjustment is required after installing the measuring system and, typically, following any change in
the optical conditions, such as:
- Distances
- Alignment
- Lenses
- Sensor replacement
Match the intensity settings of the system to the brightest object expected.
i
Each time the optical conditions are adjusted, the intensity settings of the system should be readjusted
to the brightest object to be expected.
In addition to the illumination intensity, the sensitivity of the photo receiver is also indirectly adjusted during
this process.
INT
OPT
ESC
TOL
CLR
TEACH
AUTO
1
2
3
4
5
6
7
8
OPTIONS OUT / LE
VEL
GATE
TEACH
HOLD
MULTI
CLASSIFY
CYLINDER
SPHERE
BOX
Starting in the operating mode, first select the intensity menu by pressing
(holding) the INT key for more than 2 sec.
The intensity menu is then active.