MICRO-EPSILON colorSENSOR CFO Operating Instructions Manual Download Page 122

Page: 122 / 138

Page 122

Operation

colorSENSOR CFO

5.6.8.6

Update Firmware

Go to the menu

Settings

Systems settings

Update firmware.

This function allows you to update the colorSENSOR CFO with the selected firmware file.

Fig. 65 Update firmware

Click the

Browse

button to select your firmware file.

Now click on the

Update firmware

button.

The firmware update may take up to 15 minutes. Please keep the browser window in the foreground. Do

not disconnect the colorSENSOR from the power supply or the PC during the update!

If the selected firmware file is not valid, you will get the following error message:

After a successful update, you will receive a message that the update was performed successfully and the
controller will restart.

Summary of Contents for colorSENSOR CFO











































































































































Search results

Summary of Contents for colorSENSOR CFO

Reviews:

Related manuals for colorSENSOR CFO

Brands by name

Popular brands

MICRO-EPSILON colorSENSOR CFO, Operating Instructions Manual

Search results

Summary of Contents for colorSENSOR CFO

Reviews:

Related manuals for colorSENSOR CFO

Brands by name

Popular brands