MICRO-EPSILON colorSENSOR CFO, Operating Instructions Manual

Page: 35 / 138

Page 35
Installation and Assembly
colorSENSOR CFO
4.3.6 Output Configuration
The switching outputs are connected as follows:
NPN PNP Push-Pull
V
H
Out Out
Out
V
+
V
+
R
L
R
L
Fig. 17 Output configuration (schematic)
The switching behavior (NPN, PNP, Push-Pull) is programmable , see 5.6.7 .
The NPN output is, for example, suitable for adaptation to a local TTL logic circuit with auxiliary voltage of V
H
= 5 V.
The switching outputs are protected against polarity reversal, overload (< 100 mA), excessive temperature
and have an integrated self-induction recuperation diode for inductive loads.
Not electrically separated, 24 V logic (HTL), low level GND,
high level V
+
(max. 28 V)
Model CFO100 and CFO200
Pin Color
CAB-M12-8P-Bu-ge
Function Description Comment
5 Gray OUT0 Switching output, switchable
NPN, PNP, PP, outputs cor-
respondingly programmed,
detected color or color group
directly or in binary code. Not electrically separated, 24V logic
(HTL), low level = GND,
high level =
V
+
, I
max
= 100 mA
6 Pink OUT1
8 Red OUT2