MICRO-EPSILON colorSENSOR CFO Operating Instructions Manual Download Page 9

Page: 9 / 138

Page 9

Safety

colorSENSOR CFO

Safety

System operation assumes knowledge of the operating instructions.

1.1

Symbols Used

The following symbols are used in these operating instructions:

CAUTION

Indicates a hazardous situation which, if not avoided, may result in minor or moderate
injury.

NOTICE

Indicates a situation that may result in property damage if not avoided.

Indicates a user action.

Indicates a tip for users.

Measurement

Indicates hardware or a software button/menu.

1.2

Warnings

Connect the power supply and the display/output device according to the safety regulations for electrical

equipment.

> Risk of injury

> Damage to or destruction of the controller or the measuring system

The supply voltage must not exceed the specified limits.

> Risk of injury

> Damage to or destruction of the controller or the measuring system

Avoid shocks and impacts to the controller or the sensor or the measuring system. Damage to or destruction

of the controller or the measuring system.
Never fold the sensor (optical fiber) and do not bend it in tight radii.

> Damage to or destruction of the sensor, partial failure of the measuring system

Protect the ends of the sensor against contamination (use protective caps).

> Failure of the test instrument

CAUTION

NOTICE

Summary of Contents for colorSENSOR CFO











































































































































Search results

Summary of Contents for colorSENSOR CFO

Reviews:

Related manuals for colorSENSOR CFO

Brands by name

Popular brands

MICRO-EPSILON colorSENSOR CFO, Operating Instructions Manual

Search results

Summary of Contents for colorSENSOR CFO

Reviews:

Related manuals for colorSENSOR CFO

Brands by name

Popular brands