KE600 Inverter Extension Card
186
Chapter 10 Extension Card
This chapter introduces the different kinds of extension cards of KE600 series inverter.
10.1 Injection Card
10.1.1 Introduction of injection card
When customers want to apply KE600 series inverter on the injection molding machine, the injection card
must be used (optional). It is used to sample and process the pressure and flow signals in the injection
molding machine, and the signal is current type (0~1A).
The injection card build-in two channels of processing circuit for differential current input signals. The card
is connected with J8.
The model of injection card is KE600-ZS-01.
10.1.2 Specification of injection card
Category of injection card
Terminals
Functions
Input
Current type
1I+, 1I-,2I+, 2I-
Sample and process
pressure and flow signals
0-1A
Table 10-1 Specification of injection card
10.1.3 Operation instruction of injection card
Figure 10-1 Outside drawing of injection card
This card provides four terminals.
1I+, 1I- is the current signal input channel 1, the correspond external channel is AI1, and function code is
P0-03=2, related parameters are P4-13~P4-16.
2I+, 2I- is the current signal input channel 2, the correspond external channel is AI2, and function code is
P0-04=3, related parameters are P4-17~P4-20.
The combination type of these two signals is defined by P0-07. When making the wiring connection, please
be very careful of the current positive and negative poles, otherwise the system cannot work properly.
