MG Gloster, Manual, Page: 86 / 264

78 79
BEFORE YOU DRIVE
Adaptive Cruise Control (ACC)
Position 2 - : adaptive cruise master switch, press it to turn the
system on or off.
When the ACC is On:
Position 3 - : it is the adaptive cruise exit switch, press it to disable
the adaptive cruise control, but do not clear the set cruise speed.
Position 4
-
RES+: increase the stored speed or re-activate the adaptive
cruise control and resume the stored speed.
Position 5
-
SET-: decrease the stored speed or activate the adaptive
cruise control and store the current speed.
Position 6 - : vehicle-to-vehicle distance setting, adjust the vehicle-to-
vehicle distance of the adaptive cruise control, the vehicle-to-vehicle
distance will be cycled among level 1 - 3 by each press.
Note: Please refer to "Driver Assistant System" in the Starting and
Driving section for more description about cruise function.
Voice control, Bluetooth phone and lcall switch
Type I
Type II
BEFORE YOU DRIVE
Steering Wheel Adjustment
Do not adjust the steering wheal position during driving.
This is extremely dangerous.
Adjust the steering wheel position to adapt to your driving posture
through the following steps:
1 Fully release the steering wheel adjusting handle on the steering
column downwards;
2 Grasp the steering wheel firmly with both hands, and move the
steering wheel upwards or downwards, backwards or forwards to
adjust it to a proper position;
Note: If it is still difficult to move the steering wheel to a proper
position, place the ignition switch in ON position to unlock the
steering wheel, and turn the steering wheel to the straight
forward position.
Position 1 - : audio source switch. Press SRC to switch between
the radio and MP3 playback interfaces, press up to increase the volume,
press down to decrease the volume; short press , switch to previous
band/MP3 track, long press , fast rewind; short press ,switch to next
band/MP3 track, long press , fast forward.
Position 2- : Mute switch.
Position 3 - : Bluetooth phone switch. When Bluetooth is connected,
this button is the Bluetooth phone answering switch. In the general
calling state: In case of an incoming call, short press this button to
answer; long press this button to hang up; during a call, short press this
button to hang up. In the call waiting state: Short press this button to
hung up the call waiting; long press this button to answer the call waiting.
Position 4- : Voice dialogue system switch. Press this button to enable
voice recognition function; press this button to disable voice
recognition function.
Position 5- : lcall switch.