MG Gloster, Manual, Page: 58 / 264

50 51
Information Center
Information Center Type I
The information center display is located at the right side of the
instrument cluster.
1 Trip computer interface
2 Gear display
3 Total mileage
4 Current time
5 Ambient temperature
Short press the or button in the instrument cluster selection
switch on the steering wheel to achieve the switching of
following interfaces: Trip Computer interface
»
Active Safety interface
(when your vehicle is equipped with this function)
»
Settings interface
»
Failure Inquiry interface (if a failure is available)
»
Trip Computer
interface.
Trip Computer Interface
Short press the or button in the instrument cluster selection switch
on the steering wheel to achieve the switching of following
interfaces:
• Driving mileage
This function automatically calculates and displays the remaining
driving mileage for the vehicle before the fuel is used up. The mileage
will change correspondingly after refueling.
• Instantaneous fuel consumption
This function automatically displays the instantaneous fuel
consumption of currently operating engine.
• Digital vehicle speed
It displays the current speed.
• Since the startup
Displays the trip, average speed, driving time, average fuel
consumption since the ignition switch is turned on.
BEFORE YOU DRIVE
Short press the or button in the instrument cluster selection
switch on the steering wheel to achieve the switching of
following interfaces:
• Backlight brightness
You can set the instrument cluster display brightness.
• Time setting
You can set the time on the instrument cluster.
• Time format
You can set the time on the instrument cluster in 12 hour time
format or 24 hour time format.
• Language setting (if equipped)
You can set the language based on the actual configuration.
• Overspeed alarm (if equipped)
You can turn on and off the overspeed alarm. When the overspeed
alarm is turned on, the overspeed alarm triggering speed value can be
adjusted.
Failure inquiry interface
You can inquire the relevant vehicle alarm and failure information in this
interface.
• Since the reset
Displays the trip, average speed, driving time, average fuel
consumption since the last reset.
Long press the "OK" button in this interface to reset the trip,
average speed, driving time and average fuel consumption.
• Tyre pressure monitoring
In normal mode, it displays the current tyre pressure in real time.
Note: For vehicles equipped with tyre pressure monitoring system,
after the tyres are inflated or deflated in static state, when the
inflation and deflation is greater than 8kPa, the tyre pressure
information display value on the instrument cluster will be
updated automatically.
• Battery voltage
Displays current voltage of battery.
• Mileage to next maintenance
This message reminds you of the remaining mileage of your vehicle
before the next maintenance.
Settings interface
BEFORE YOU DRIVE