MG Gloster, Manual, Page: 199 / 264

190 191
EMERGENCY TROUBLESHOOTING
10 Put away the replaced wheel, auxiliary rotary post of the jack, wheel
nut wrench, jack and vehicle tool kit.
Be sure to fully lift and tighten the tray of the spare wheel device
even if no spare wheel is mounted.
Vehicle Towing
When towing a vehicle or making a vehicle be towed, be sure to observe
relevant national regulations on vehicle towing.
Towing Eye
Front Towing Eye
The front towing eye is located at the lower side of front bumper.
The mass that the front towing eye can bear is 1/2GVW (total mass).
Do not tow a vehicle with a mass more than this value.
EMERGENCY TROUBLESHOOTING
Rear Towing Eye
If it is required to tow a vehicle from rear side, remove the towing eye
plug from the left side of rear bumper, and screw the rear towing eye in
the vehicle tool kit into the rear bumper.
After completing the vehicle towing, unscrew the rear towing eye and
place it in the vehicle tool kit, and replace the towing eye plug.
The mass that the rear towing eye can bear is 1/2GVW (total mass).
Do not tow a vehicle with a mass more than this value.
The application range of towing rope is as shown below: