MG Gloster, Manual, Page: 70 / 264

62 63
BEFORE YOU DRIVE
When the ignition switch is turned to the ON position,
"Battery Charging Indicator Lamp (red)” illuminates, and goes off after
the engine is started.
Battery Charging Indicator Lamp
If the warning lamp stays on after the angina is started or illuminates
during driving, it indicates that the charging system has a malfunction,
please contact Service Dealer for service as soon as possible.
Constant Speed Cruise Indicator Lamp
With the ignition switch placed in ON position, when the
cruise system is in standby state, the "Constant Speed Cruise Indicator
Lamp (white)" illuminates, when the system is in activation state, the
"Constant Speed Cruise Indicator Lamp (green)” illuminates. Please
Refer to "Constant Speed Cruise Control System" in the Starting and
Driving section for more information.
Adaptive Cruise Control Indicator Lamp
With the ignition switch placed in ON position, turn on the
adaptive cruise, when the adaptive cruise system meets the activation
conditions, the "Adaptive Cruise Control (ACC) Indicator Lamp
(green)" illuminates. When the adaptive cruise control system is in
standby mode, the "Adaptive Cruise Control (ACC) Indicator Lamp" on
the instrument cluster will change from green to white. Please Refer to
"Driver Assistant System" in the Starting and Driving section for more
information.
Adaptive Cruise Vehicle-to-Vehicle Distance
Indicator Lamp
With the ignition switch placed in ON position, turn on the
adaptive cruise, when setting the vehicle-to-vehicle distance, the
"Adaptive Cruise Vehicle-to-Vehicle Distance Indicator Lamp (yellow)"
illuminates. Please Refer to "Driver Assistant System" in the Starting and
Driving section for more information.
4WD Malfunction Warning Lamp
When the ignition switch is turned to the ON position,
"4WD Malfunction Warning Lamp (red)" illuminates or illuminates
during driving, it indicates that the 4WD system has a malfunction,
please contact Service Dealer for service as soon as possible. Please
Refer to "Four Wheel Drive (4WD)" in the Starting and Driving section
for more information.
Caution
BEFORE YOU DRIVE
Lane Departure Alert Warning Lamp
With the ignition switch placed in ON position, when the
lane departure alert is in standby state, the "Lane Departure Alert
Warning Lamp (whiter)” illuminates.
When the lane departure alert is in operating state, the “Lane Departure
Alert Warning Lamp (green)” illuminates.
When the lane departure alert is in operating state and gives an alarm,
the "Lane Departure Alert Warning Lamp (yellow)" blinks.
When the lane departure alert is in off state or has a malfunction the
"Lane Departure Alert Warning Lamp (yellow)" illuminates.
If the warning lamp illuminates yellow when the lane departure alert is
on, it indicates that the lane departure alert has a malfunction, please
contact our Service Dealer for service as soon as possible. Please Refer
to “Driver Assistant System” in the Starting and Driving section for
more information.
Intelligent Start/Stop System Indicator Lamp
With the ignition switch placed in ON position,
turn on the start/stop system, when the start/stop conditions are not
met, the “Intelligent Start/Stop System Indicator Lamp (white)”
illuminates.
With the ignition switch placed in ON position, turn on the start/stop
system, when the engine automatically stops, the "Intelligent Start/Stop
System Indicator Lamp (green)” illuminates.
With the ignition switch placed in ON position, turn on the start/stop
system, when the start/stop system has a malfunction, the "Intelligent
Start/Stop System Indicator Lamp (yellow)" illuminates.
Please Refer to “Intelligent Start/Stop System" in the Starting and
Driving section for more information.
AUTO HOLD Indicator Lamp
With the ignition switch placed in ON position, turn on the
AUTO HOLD, the "AUTO HOLD Indicator Lamp (green)" illuminates;
when the AUTO HOLD is activated, the "AUTO HOLD Indicator Lamp
(green)" blinks.
AUTO HOLD has the memory capability. When the AUTO HOLD is
on, after the driver unbuckles the seat belt, the "AUTO HOLD Indicator
Lamp (green)" goes out, but the On state is still memorized by the
AUTO HOLD system. When the AUTO HOLD is on, the vehicle speed
exceeds 3 km/h and the seat belt is not fastened, the "AUTO HOLD
Indicator Lamp (green)” illuminates to remind the driver that the AUTO
HOLD On state has been recalled, and the AUTO HOLD can be
activated just by fastening the seat belt again. When the AUTO HOLD is