MG Gloster, Manual, Page: 31 / 264

23 22
BEFORE YOU DRIVE
Seats
Driver seat adjustment
Do not adjust the driver seat while the vehicle is running.
if so, the vehicle may be out of control and result in an
Manually adjusted driver seat
Forward/backward sliding
Pull up the handle (1), and slide the seat to the desired position. Release
Backrest Adjustment
The tilt angle of driver seat should not be too large, the
seat belt can provide the maximum protection only
when the seat back forms an angle of about 25° with the
With the body tilting slightly forward, pull up the adjusting handle (2),
the seat back will automatically bounce back, then recline against the
seat back to adjust it to the desired angle. Release the adjusting handle
(2) and confirm that the seat back is locked in place.
Cushion Height Adjustment
Pull up the adjusting handle (3) to raise the seat height, and press the
handle (3) to lower the seat height. When making significant
adjustments, it is required to pull up and press the handle (3)
BEFORE YOU DRIVE
Electrically adjusted driver seat
Caution
Regardless of where the ignition switch is placed, the seat can be slid
back and forth, the backrest and the tilt angle and height of cushion
can be adjusted. But the electrical adjustment is power consuming,
which may drain the battery. The lumbar support adjustment and
massaging and memory position functions can be enabled after the
engine start.
Forward/backward sliding
When the button (5) is pushed forward (arrow A), the seat will move
forward, and when the seat slides to the desired position, release the
When the button (5) is pushed backward (arrow B), the seat will move
backward, and when the seat slides to the desired position, release the
button (5) to stop the seat sliding.
Backrest Adjustment
The tilt angle of driver seat should not be too large, the
seat belt can provide the maximum protection only
when the seat back forms an angle of about 25° with the
vertical direction.
When the button (6) is rotated forward (arrow C), the seat backrest will
tilt forward, when the seat backrest tilts to the desired position, release
the button (6) to stop the tilting.
When the button (6) is rotated backward (arrow D), the seat backrest
will tilt backward, when the seat backrest tilts to the desired position,
release the button (6) to stop the tilting.
Cushion Inclination Adjustment
When the front end of button (5) is pulled upward (arrow H), the front
end of cushion will raise, when the cushion tilts to the desired position,
release the button (5) to stop the cushion movement.
When the front end of button (5) is pulled downward (arrow G), the
front end of cushion will lower, when the cushion tilts to the desired