MG Gloster, Manual, Page: 118 / 264

110 111
STARTING AND DRIVING
Keyless Start System
Keyless Unlocking
When all doors are locked, enter the sensing area with a remote key and
press the micro switch, the central lock will unlock automatically. After
unlocking, direction indicator lamps will flash twice. If you do not
conduct any of the following operations within 30s after that, the central
lock will automatically lock again:
• Open any door
• Shift the power supply position to a non-OFF position
• Operate the central lock to unlock/lock
Note: It is feasible to unlock doors with the central unlocking
button on the remote key. Press the central unlocking button
once, and the central lock will unlock automatically.
Keyless Locking
When the driver's door or front passenger's door is unlocked, enter the
sensing area with a remote key, and then press the micro switch on the
door handle. The direction indicator lamps will flash once, meanwhile
the alarm horn will ring once for a short time (as appropriate). Then all
doors will be locked, meanwhile the vehicle enters the fortification
state. In any of the following cases, the doors will not be locked after the
micro switch is pressed:
• The power supply switch is placed in non-OFF position
• The remote key is left in the vehicle
• The remote key is not in the sensing range
• The remote key battery is low
• The driver's door is open
Note: It Is feasible to lock doors with the central locking button on
the remote key. Press the central locking button once, and the
central lock will lock automatically .
STARTING AND DRIVING
Keyless Start
When the remote key is left in the vehicle and the starting conditions
are met, press the start-stop switch once at this time, and then the
engine will be started.
Starting conditions:
• Automatic Transmission
Place the shift lever in P or N position.
Depress the brake pedal and hold.
Note: If the starting conditions are not met, every time you press
the start-stop switch, the power supply positions will be switched
among OFF, ACC and ON in a cycle. If
the remote key is not in the vehicle, after depressing the brake
pedal, the indicator lamp will not illuminate, and the power
supply position switching or ignition action will not be performed
after the start-stop switch is pressed.
Backup Starting
When the remote control battery is low, the keyless entry function will
fail, but you still can start the engine. Open a door with the mechanical
key and enter the vehicle. At this time, the system may be in IMMO state
and the alarm may be triggered, which is a normal situation.